When Honda announced in 2013 they would return to Formula 1 as a power unit supplier to McLaren, many with fond memories of Ayrton Senna and Alain Prost’s dominant title wins of the eighties and nineties hoped for a return to those glory days.
The engine Honda introduced in 2015, RA615H, was designed to meet what McLaren’s then-boss Ron Dennis termed a “size zero” concept. It was not Honda that chose this design direction. McLaren’s strong desire for Honda to keep the power unit as small and as compact as possible was the driving factor.
However the Honda team did not create a compact design at the expense of performance. In hindsight, the team had set specifications for the V6 combustion engine development without a clear idea of the turbo pressures required or the ideal air-fuel mixture. The Honda Power Unit team assumed they would be able to figure it out in due course.
That assumption did not survive its first contact with reality. When the 2015 season rolled around, it was painfully obvious that they were severely lacking performance. So much so that at one race Fernando Alonso famously commented over the team radio to his engineer “It feels like GP2. Embarrassing. Very embarrassing.” His choice of event was no coincidence either: The Japanese Grand Prix at the Honda-owned Suzuka circuit.
Engineers at Honda were already at work trying to improve performance for the 2016 season. The RA616H had a revised plenum and the turbo housed inside the V-bank of the engine was increased in size to keep up with the increasing power demand of the internal combustion engine (ICE).
While the revised plenum increased the overall height of the engine by a few centimetres, it allowed for a more optimised intake system which facilitated smoother airflow into the combustion chamber by reducing the number of bends in the branches of the intake system. The variable intake system housed inside the plenum was also redesigned before that year’s British Grand Prix to further optimise airflow into the engine.
“At the time, we were trying various different technology upgrades, so it is hard to say that the revisions in the intake system were the only effect, but I do recall an improvement of about 7kW in power after the changes with McLaren’s help,” recalls Tetsushi Kakuta, executive chief engineer of F1 power unit development at Honda Racing Development Sakura.
Advert | Become a RaceFans supporter and
In a world where 5kW can make a big difference in the overall competitiveness of power units, this was clearly a big step forward. However, the changes in the intake system also brought some major setbacks.
Because the overall height of the engine had increased, the engine’s centre of gravity also moved up by about 8mm. In the pursuit of improved reliability and performance, the power unit also became around 4.2 kg heavier.
For the next season, McLaren’s designers pushed Honda to focus on lowering the centre of gravity and help to ‘shrink wrap’ the top of the engine cover for better aerodynamics. Taking this feedback to heart, the Honda team went back to the drawing board to create an all-new design for the 2017 season.
The resulting RA617H was the first of Honda’s engines to implement the ‘split-turbo’ design which Mercedes adopted from the outset of the regulations with its standard-setting power unit. The compressor sits in the front of the engine and the turbine at the rear, with the MGU-H motor housed inside of the V-bank.
Switching to this design meant Honda’s turbo could now be sized without being limited by the space between the cylinder banks. It also helped lower the centre of gravity by bringing down the position of the shaft connecting the compressor and turbine. With this change, the RA617H was able to drop the CG height by over 25mm compared to the previous year.
However, the most significant technological improvement over the RA616H was the introduction of the pre-combustion chamber. This is a separate chamber inside the cylinder head connected to the main cylinder area that surrounds the tip of the spark plug.
In this chamber, a richer air-fuel mixture is ignited and strong jets of hot gasses escape from tiny holes in the walls of the pre-combustion chamber. These strong jets of hot gasses quickly ignite the rest of the air-fuel mixture in the cylinder. This pre-chamber ignition technology enabled Honda to make large gains in performance that would not have been possible with conventional spark methods.
While the introduction of the pre-combustion chamber provided great potential for performance improvement, development time was required to fully get a handle on pre-chamber ignition. The first iteration of the design looked like a cap with perforations screwed onto the tip of the spark plug.
Optimising the location where the jet of hot gasses emitted from the holes perforated in the pre-combustion chamber landed was a critical development point to gain performance. Additionally, if the surface of the pre-combustion chamber was not cooled properly, the remaining heat from the surface would auto-ignite the main chamber, causing pre-ignition.
Advert | Become a RaceFans supporter and
While the Honda team resolved this by making the pre-combustion chamber out of a material with high-heat transfer properties, this caused the spark plug to retain much of the heat, causing them to melt. Honda worked with NGK to design a pre-combustion chamber that was fully integrated into the spark plug to further help with heat dissipation.
The number of holes, the hole diameters, and the volume of the pre-combustion chamber were also optimised for maximum flame propagation. All this enabled Honda to realise a performance gain of around 40kW over their original design introduced in 2015.
Despite their struggles and rocky relationship with McLaren, Honda managed to make performance gains. But so had their rival power unit manufacturers.
McLaren finished the 2015 season, their first year back with Honda, a lowly ninth in the championship, with only the Manor team behind them. They improved to sixth the following year, but chronic unreliability pegged them back to ninth in 2017. McLaren’s patience had run out, and well before the season was over it became clear the two parties would go separate ways.
Earlier in the season Sauber had announced it would become a second Honda user in 2018. But the team was subsequently sold to new owners and within three months new team principal Frederic Vasseur had cancelled the Honda deal.
However within two years Honda became a two-team effort. A successful year supplying engines to Red Bull’s junior team Toro Rosso (now AlphaTauri) paved the way for a fruitful tie-up with the senior squad.
For 2018 season with Toro Rosso, Honda turned their attention to further improving the thermal efficiency of the internal combustion engine. This is typically done by increasing the compression ratio or the air-to-fuel ratio. Pre-chamber ignition technology allowed Honda to make progress on both fronts, but the power unit development team felt that this alone was not enough to catch the leaders. To fill this gap, Honda developed what they called ‘High-Speed Combustion’.
In a conventional combustion process, the flame front fans out from the tip of the spark plug where it is ignited. However, this process takes time for the flame to fully ignite all the fuel in the piston. It can also lead to incomplete combustion and because the flame propagation takes time, meaning full combustion may not be achieved at top-dead centre (maximum compression) where maximum power can be produced.
Pre-chamber ignition speeds up flame propagation by igniting a larger flame front area in the piston using the hot ignited gasses jettisoned out of the pre-combustion chamber. Taking this idea one step further, Honda’s engineers came up with its High-Speed Combustion technique.
During this process, the hot ignited gasses from the pre-combustion chamber are directed towards the cylinder walls and the heat from this auto-ignites air-fuel mixture. Thus, instead of the flame front propagating centre-out, the flame ignites in a ring shape (like a doughnut) and propagates outside-in, in a three-dimensional fashion. This vastly increases the speed of the flame propagation, hence the name High-Speed Combustion. This technology was implemented at the Russian GP in 2018 in the ‘spec three’ version of the RA618H.
This idea was further developed on the RA619H which was used the following year by Toro Rosso and – for the first time – Red Bull.
“By utilising High Speed Combustion, we were able to vastly increase both the compression ratio and the air-fuel ratio” recalled Kakuta. “By optimising the valve geometry and repositioning the injector that used to sit on the exhaust side, the RA619H was able to make significant gains over the previous years.”
Honda’s team was met with a different culture when they switched from McLaren to the two Red Bull teams. “Red Bull offered to provide more cooling if the power output could be increased,” Kakuta explained.
“When we were partnered with McLaren, they claimed that their previous engine supplier (Mercedes) could run their PU hotter and asked us to raise our operating temperature window. With Red Bull, perhaps Renault’s operating temperatures were much lower and they were happy to work with us to optimise the operating temperature window.”
Red Bull started with securing space and airflow for a charge air cooler. By decreasing the inlet temperatures, the compression ratio of the engine could be increased without worrying about knocking. In 2019 Honda also started developing fuel blends and made big leaps on this front. Finally, at the Austrian Grand Prix, Honda achieved its first victory of the V6 hybrid turbo era.
It was the Japanese manufacturer’s first F1 win since 2006. But while that proved a one-off for its short-lived manufacturer team, there was more to come for its hybrid engine project.
For 2020 their goal was to “maximise the potential” of the power unit design based on the RA619H. One of the major disadvantages of utilising High-Speed Combustion was the decline in performance over the lifetime of the engine. Because combustion pressure was increased due to the High-Speed Combustion process, the pressure applied onto the cylinder walls by the piston ring also increased and caused the cylinder walls to deteriorate quicker. As a result, surface wear accelerated and the seal between the piston ring and the cylinder wall leaked, leading to pressure loss and power output loss.
To combat this, Honda Racing Development (HRD) Sakura collaborated with Honda’s Kumamoto Manufacturing centre to develop a special plating process to coat the inside of the cylinder walls, dubbed “Kuma-Mekki” (“Kuma” from “Kumamoto” and “Mekki” meaning ‘plating’). This plating was a breakthrough for Honda as it allowed the power units to maintain their performance until the end of life. This increase in reliability also allowed the team to run the engines in higher modes for longer durations over the race weekends. This was precisely what “maximising the potential” was all about.
Upon deepening their understanding of the High-Speed Combustion process and optimising compression ratio and air-fuel mixture to maximise power output and reliability, it became clear to the power unit development team that the ICE design Honda had been using since 2017 had reached its limits and a whole new concept was required to further improve performance.
Originally, the HRD Sakura team planned to introduce this new design in line with the Formula 1 regulation change in 2022 (originally planned for 2021 but pushed back a year due to the Covid-19 pandemic). However in 2020 the Honda board made an unexpected decision to pull out of Formula 1 entirely at the end of the following season, prompting the team to bring this design forward.
The RA621H was a full bottom-up redesign for the ICE. One of the goals of this redesign was to integrate better into the Red Bull chassis and help contribute towards better packaging for aerodynamic performance. On the RA621H, the valve angle was reduced to optimise for a higher compression ratio, and the length of the valves was also reduced to help with packaging.
The team also brought the exhaust-side camshaft further inboard by reducing the size of the gear train. Overall, this brought the outer-facing exhaust valves over 30mm further inboard and allowed for tighter packaging on Red Bull’s end. To further contribute to a smaller engine cover, Honda also removed a rib that was on the exhaust side originally intended to increase the rigidity of the cylinder head cover.
However increasing the strength of the cylinder head and block was also necessary as the pressures they were subjected to had increased over the years of development of the ICE. In 2018 and 2019, the aluminium alloy used for the cylinder heads was changed to a stronger alloy. The cylinder block also followed suit in 2021 when the design of the block was completely changed for the RA621H. The new, stronger material also allowed Honda to cut down some of the material thicknesses, allowing for a lighter but stronger package.
Having powered Red Bull to three wins in 2019, three further victories followed in the shortened 2020 season, one of which came courtesy of AlphaTauri. This fell short of the desired progress on both sides. Honda publicly claimed its withdrawal from F1 was for other reasons, but the limited success it enjoyed up to that point surely had a bearing on its fourth withdrawal from the sport.
But from the start of 2021 it was clear the Red Bull-Honda package was capable of fighting Mercedes for the championship. This was the toughest opposition the Silver Arrows had faced since the V6 hybrid turbos were introduced. The fight went to the final round, and while Mercedes prevailed in the constructors championship, the drivers trophy went the way of Red Bull’s Max Verstappen, albeit in contentious circumstances.
It would not have happened without an incredible effort from Honda which, from their lower point in 2015, propelled them past Ferrari and Renault to the same level as Mercedes. Over seven seasons, Honda increased their overall power output by some 100kW (around 134 bhp) – a monumental feat.
Honda is unquestionably the “most improved” power unit manufacturer in this turbo-hybrid era. Its engines are now Red Bull branded, and while they have had some problems at the beginning of the new season, they have already taken their first victory of the year in Jeddah, and could yet propel Red Bull to even greater successes than they enjoyed last year.
Become a RaceFans Supporter
RaceFans is run thanks in part to the generous support of its readers. By contributing £1 per month or £12 per year (or the same in whichever currency you use) you can help cover the costs of creating, hosting and developing RaceFans today and in the futue.
Become an RaceFans Supporter today and browse the site ad-free. Sign up or find out more via the links below:
- Why McLaren are “slightly happier” after debut of long-awaited upgrade
- Pictures: Ferrari among five teams with car updates for Miami Grand Prix
- McLaren and Alpine bring biggest updates as teams reveal Azerbaijan GP car changes
- Pictures: F1 teams’ car updates for the 2023 Australian Grand Prix
- Pictures: All 10 F1 teams bring updates for second race of season in Jeddah
37 comments on “The innovations which took Honda from ‘GP2 engine’ to F1 world champions”
14th April 2022, 13:49
Really great article, nice to see more in-depth technical analysis here.
14th April 2022, 14:49
Yes, very interesting.
14th April 2022, 14:51
14th April 2022, 19:51
Double agreed, wonderful article, it must have taken some research, thanks Keith!
14th April 2022, 21:32
14th April 2022, 15:07
The pre-combustion chamber is something Honda designed back in the 1970s. It does sought of seem odd they forgot about that on the initial design. Fundamental to lean burn engines and emissions control.
14th April 2022, 15:22
Another great article again. Love it. Now to fix the photo galeries to make them easier to navigate (as i have been begging dor years!)
Rhys Lloyd (@justrhysism)
15th April 2022, 15:26
Especially when there’s so many WP plugins which do it OOTB.
14th April 2022, 15:24
Very interesting! Great article. Thanks, Keith
14th April 2022, 15:25
Great article @keithcollantine – thanks for the read!
14th April 2022, 16:39
Fascinating article about the technical minutiae that are behind these powerful cars. It would have been perfect if there had been drawings or even basic animations of the complex concepts exposed, but I know that I’m asking too much.
The truth is that I would gladly exchange a boring 3-hours documentary about this with all Drive to Survive seasons so far and beyond.
14th April 2022, 17:02
Nice article, but Honda aren’t world champions. Mercedes are. Just sayin’
14th April 2022, 17:28
Honda didn’t compete in the Constructors Championship – Red Bull did. Verstappen won the title powered by Honda so they were a big part of that.
14th April 2022, 19:28
Splitting hairs I know, but still – the article’s title claims Honda are world champions which is patently not true. I have a principled approach to this – F1 oft throws the word champion about carelessly, but if you’d spent the money Mercedes did earning a WCC, you wouldn’t be happy an article titled as this misidentified the true constructors champion. I mean RB hold a tenuous grip on the WDC as it is. Let’s not have them claiming Constructors victory too ey. No malice or disrespect intended!
15th April 2022, 2:09
Splitting hairs indeed. Honda powered the drivers’ champion, so I’d say it is patently true that they are champions. The Mercedes team won the constructers championship, which was powered by the Mercedes engine. So they are also champions. That doesn’t remove or diminish Honda’s achievement at all.
15th April 2022, 8:32
I tend to agree, I’ve always been of the opinion that verstappen deserved the driver’s title because he drove better than hamilton over a season, and even with the abu dhabi misshap still was less lucky than hamilton over the season, and mercedes brought the best car and the most competitive number 2, and hence deserved the constructor, as much as I don’t like them, so I would also have a hard time calling honda world champions, but certainly they improved a lot from where they started.
15th April 2022, 20:55
@esploratore1 Yeah for sure. Max led more laps than the rest of the grid combined including LH. That’s credit to him, Newey, Honda, and RBR in general. RBR fully accepts that they did not win the WCC in 2021 (Horner even called it appropriate), but that doesn’t mean they hang their heads at what they brought to the table for the season either. They know that certain circumstances in all motor racing are always going to happen that have more to do with outside influences e.g. rear left Pirelli blowout, Silverstone, and Bottas being a pinball, and in this case they missed out on the WCC, but that certainly doesn’t mean they failed, or at least they won’t be looking at it that way even if anti-RBRers might choose to do so.
14th April 2022, 17:02
Great article, more please
14th April 2022, 17:31
Fascinating. Great article!
14th April 2022, 17:35
Honda is just a tremendous conpany. Years of MotoGP and F1 success. I bought a Honda motorcycle this year for the first time, having had bikes of various other manufacturers over the years, the Honda screams quality in every detail. An incredible culture and company, long it may continue.
14th April 2022, 17:42
wow some 2016 cars were ugly…
14th April 2022, 19:50
@alfa145 That was exactly my first impression. They look awful.
15th April 2022, 4:28
I’d say that picture is way worse than ugly…
14th April 2022, 17:47
Great read, thanks Keith.
By the way does anyone know where to find that elusive NHK documentary? where, among other things, they talk about how they fixed the turbo issues they where having. I found a single episode some time ago but with no subtitles :(
14th April 2022, 18:28
Great article. As a McLaren fan, those were tough years. Fantastic read!
14th April 2022, 21:22
One of the most absorbing and fascinating articles on F1 engineering I’ve read. Bravo!
15th April 2022, 2:03
Can now see where their “we have the best aerodynamics” comments were stemming from. There’s some proverb hidden there, something about not asking your engine for aerodynamics like you don’t ask your front wing for horsepower.
Sounds like McLaren were bossy and demanding, where as Red Bull were accomodating and willing to work together, as they even were when working with Renault. I wonder if McLaren coming from that OEM customer relationship they had with Mercedes hurt them ultimately and not fully embracing the works team spirit.
Echoing a bit, but great article. Really appreciated the insight, fascinating how hard they’ve worked over the years. Love the development of kuma-plating. Legendary Japanese spirit.
Avro Anson (@avroanson)
15th April 2022, 5:17
Yes a great article, but sadly missing photos and drawings which would illuminate exactly what is being described. You know – one picture is worth a thousand words.
15th April 2022, 5:52
Very, very strong and good article!
John Cousins (@drone)
15th April 2022, 7:41
The split turbo design pioneered by Mercedes was pure genius. Compressor size has such a large impact on engine performance from both a mass flow and inlet air temperature perspective, I can’t believe it took the others so long to catch on. Even more surprising is that Honda didn’t use their knowledge from their earlier dabbling with pre-combustion. What I can’t get my head around is that as far as im aware, Ferrari are still using a somewhat conventional turbo design and seem to be making the required horsepower this season!
On a side note… Is it possible that porpoising is actually a ground effect version of DRS?
I.e. when downforce is shed during an underbody aerodynamic stall… surely so would its associated drag! it’s crude… but so was f-duct and it worked incredibly well!
I have an opinion
15th April 2022, 10:57
First-class article, Mr Collantine. I wonder if Honda is comfortable releasing these details only now due to the hand-off to Red Bull Racing. It would also be interesting to know if Honda’s improvements converged on the competitors’ engine designs.
15th April 2022, 11:18
I’m going to start using this phrase every day. :)
16th April 2022, 1:54
I think this season the fact LH has a deal with Mini Cooper and Renault but will be driving a car powered by Audi speaks volumes.
16th April 2022, 8:45
Wow what a brilliant article Keith. Incredible research and detail. People can argue all they want about whether Honda are World Champions or not, but I do feel that if anyone deserved to be up there fighting for wins and titles, it was probably Honda given the amount of work they put in.
I agree with Tristan/@skipgamer that the most crucial point in the Honda story was probably the switch from the demanding and uncompromising McLaren to what appeared to be a more compromising Red Bull family. RB and TR/AT seem to have given Honda a bit more leeway in development, and it seems to have paid off in the end!
17th April 2022, 10:44
Excellent article, really interesting.
18th April 2022, 12:19
Great article, I do like a good comeback story, very happy for Honda.
19th April 2022, 11:05
thanks alot of information
Comments are closed.